Introduction

Eagle Eye-10IE is a 3-axis high stabilized gimbal with EO(electro-optical) and IR(infrared) sensors for drone inspection,surveillance,search and rescue applications. The 10X zoom camera provides 1080P 60FPS full HD video streaming and up to 120X zoom capability, which will enable you to capture every detail in the air. While the thermal camera allows you to detect targets in the night or low visibile conditions, and provides you with priceless information when you are carrying out missions like inspecting or monitoring objects. High-performance 3-axis gimbal is developed based on FOC(field-oriented control) technology, which will give you crystal clear video footage.

Compact and lightweight
Eagle Eye-10IE weighs as little as 879g to help you meet your payload weight allowance.

Auto object tracking
Eagle Eye-10IE is using the most advanced thermal tracking technology,with which you will never lose the object, the tracking function works on daylight sensor too. How it works:zoom in and put the object you want to track in the screen,move the cursor to the object and lock it via controller, and then the camera will track it automatically.

Dual video output
There are 2 video streaming outputs: HDMI and Ethernet, which will give you the flexibility to choose the video transmitter for your drone.

Geo-referencing
GPS coordinates from a Pixhawk flight controller will be led to the gimbal and you can read it from photo EXIF file.

Easy for integration
Eagle Eye-10IE comes with an amazing advantage that the gimbal can not only be controlled via PWM signal, but also serial command. Also, gimbal status(like Yaw/Pitch/Roll angle,zoom position etc) can be obtained by sending serial command to the gimbal via its serial port, which is really useful for precise gimbal control and system integration.

Clean and simple wiring
Eagle Eye-10IE provides an outstanding wiring hub design for RC receiver and video output port,which makes wiring pretty easily. Also, the gimbal offers 2 smart speed modes: FAST speed and LOW speed. Fast speed mode is used for small zooming range, which makes the gimbal control sensitive and quick. LOW speed mode is used for large zoom range, will enable you to target the object more accurately.

Gimbal quick-release mechanism
This feature is avalable for this camera, please check HERE to get more information.

Specification

10X zoom camera
Sensor	1/2.9 inch 4MP CMOS SENSOR
Video output	1080P/60 HDMI, 720P/30 Ethernet
Video recorded	1080P/30 MP4
Focal length	10X optical focal zoom, 4.9-49mm
Digital zoom	12X
Wide Dynamic	Up to 105dB
Auto focus	Less than 1S
Low illumination	0.05lux@F1.6(color), 0.01lux(white/black), olux(IR)
FOV	H:WIDE 61.11º±5% TELE 7.65º±5%
FOV	V:WIDE 35.2º±5% TELE 4.12º±5%
Aperture	Φ 12.0
Vertical Roll / Horizon Mirror/Static	Support
Thermal camera
Lens	25mm
Working system	Un-cooled long wave (8μm～14μm)
Detector pixels	640×480
Pixel size	17μm
Focusing	Athermalizing
FOV	Horizontal: 24.6°
	Vertical: 18.5°
	Diagonal: 30.4°
Detective Distance (Man: 1.8x0.5m)	735 meters
Recognize Distance (Man: 1.8x0.5m)	184 meters
Verified Distance (Man: 1.8x0.5m)	92 meters
Detective Distance (Car: 4.2x1.8m)	2255 meters
Recognize Distance (Car: 4.2x1.8m)	564 meters
Verified Distance (Car: 4.2x1.8m)	282 meters
Emissivity correction	Emissivity 0.01~1 adjustable
NETD	≤50mK(@25℃)
MRTD	≤650mK(@Characteristic frequency）
Image enhancement	Automatically adjusts image brightness and contrast
Color palette	White hot, pseudo color
Automatic non-uniformity	Yes(with or without shutter)
correctionfunction	Yes(with or without shutter)
Digital zoom	1x, 2x, 3x, and 4x
Time synchronization function	Yes
Gimbal system
Input voltage	3S-4S
Rotate range	Pitch: ±90° Roll: ±45° Yaw: ±150°
Angle amount of jitter	Pitch and roll: ±0.02° Yaw:±0.03°
Control interface	PWM, S.Bus, serial command, and software control via Ethernet
Working Current	Static current: 240mA(@12V)
Working Current	Dynamic current: 320mA(@12V)
Mechanical feature
Total weight (gimbal and camera)	879g
Working temperature	-25° ~ +60°