The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

YANGDA YD6-1600L Gas Electric Hybrid Hexacopter

YANGDA YD6-1600L Gas Electric Hybrid Hexacopter

$12,999.00 $11,187.00
(You save $1,812.00)
SKU:
YD6-1600L hybrid
Weight:
42.00 KGS

Introduction

Have you ever encountered these problems on battery-powered multi-rotors: it is very hard to get a 45 minutes flight time with 5KG payload at an altitude of 4500 meters, due to the thin air up there. Or it is almost impossible for the multicopter to fly for 1 hour in the cold winter at a minus 10-degree temperature because the battery voltage will drop dramatically in this case. YANGDA YD6-1600L gas-electric hybrid drone is designed to overcome these drone flight time limits. It is using one powerful gas-driven electricity generator which will give you continuous and stable power supply despite the high/low temperature or high altitude, will enable you to carry out long-range inspection, survey, aerial photography, search, rescue, and public safety applications.

Three version generators
To realize different drone applications, we will adopt the most appropriate hybrid engine on YD6-1600L hybrid drone. Three hybrid engines are for options: 2.4kW version, 3.6kW version, and 6.0kW version.

Max 3.8 hours endurance
When equipped with a 2.4kW generator, the YD6-1600L fuel-electric drone can fly 3.8 hours with 3.4kg payload.

10.3KG payload capability
YANGDA YD6-1600L hybrid hexacopter can lift max 10.5kg payload when the 6.0kW engine is adopted.

High-performance and stable propulsion system
YD6-1600L hybrid power UAV is using T-Motor propulsion system, which is proved of high quality and stability.

Easy for transportation, quick to set up
Pluggable arms of YD6-1600L frame makes the drone is easy for transportation. The drone set up can be done in 5 minutes by a single man.

Backup battery
YD6-1600L hybrid drone provides 2 units 6S lipo batteries for 90 seconds emergency landing, just in case the gasoline-electric engine fails during the flight.

Multiple payload options
All YANGDA drone gimbal, camera and other payloads like drone megaphone can be installed on YD6-1600L hybrid UAV.

Video

   

Specification

2.4kW version YD6-1600L hybrid drone

Wheelbase 1600mm Cruise speed 11m/s
Wingspan 2350mm Altitude 1000m
Endurance 3.8Hours (18kg take-off weight) Generator weight 4.2kg
Working temperature -20°C ~ 40°C Voltage of generator 12S
No payload weight 10.4kg(no fuel) Generator output Max: 2.4kW / Continuous: 2.0kW
Max take-off Weight 18kg Fuel consumption rate 600g/kW·h (hovering: 1.5L/h)
Max payload 3.4kg Fuel tank 5.7L(default), customizable(max 7.5L)

 

3.6kW version YD6-1600L hybrid drone

Wheelbase 1600mm Cruise speed 11m/s
Wingspan 2350mm Altitude 1000m
Endurance 1.42Hours (24kg take-off weight) Generator weight 5.7kg
Working temperature -20°C ~ 40°C Voltage of generator 12S
No payload weight 11.9kg(no fuel) Generator output Max: 3.6kW / Continuous: 3.0kW
Max take-off Weight 24kg Fuel consumption rate 650g/kW·h (hovering: 4L/h)
Max payload 7.8kg Fuel tank 5.7L(default), customizable(max 7.5L)

 

6.0kW version YD6-1600L hybrid drone(customized version)

Wheelbase 1600mm Cruise speed 11m/s
Wingspan 2350mm Altitude 1000m
Endurance 1.25Hours (30kg take-off weight) Generator weight 7.2kg
Working temperature -20°C ~ 40°C Voltage of generator 12S
No payload weight 13.4kg(no fuel) Generator output Max: 6.0kW / Continuous: 5.0kW
Max take-off Weight 30kg Fuel consumption rate 700g/kW·h (hovering: 6L/h)
Max payload 10.3kg Fuel tank 7.5L(default)

 

YD6-1600L Hybrid Catalog Download 

Your Purchase Includes

2.4kW version YD6-1600L hybrid drone

1 x YD6-1600L carbon fiber hexacopter frame
1 x 2.4kW Generator
1 x 5.7L Fuel Tank
6 x T-Motor motor
6 x T-Motor ESC
3 x T-Motor 29*8.7 inch propeller
1 x CUAV V5+ Flight Controller with NEO V2 GPS module
1 x YANGDA YR16S 16 Channel Radio Controller
2 x 6S 2500mAh lipo batteries
1 x Generator accessory(starter, fuel level indicator, cable/wire etc)
1 x Assemble and test service

 

3.6kW version YD6-1600L hybrid drone

1 x YD6-1600L carbon fiber hexacopter frame
1 x 3.6kW Generator
1 x 5.7L Fuel Tank
6 x T-Motor motor
6 x T-Motor ESC
3 x T-Motor 29*8.7 inch propeller
1 x CUAV V5+ Flight Controller with NEO V2 GPS module
1 x YANGDA YR16S 16 Channel Radio Controller
2 x 6S 2500mAh lipo batteries
1 x Generator accessory(starter, fuel level indicator, cable/wire etc)
1 x Assemble and test service

 

6.0kW version YD6-1600L hybrid drone(customized version) 

1 x YD6-1600L carbon fiber hexacopter frame
1 x 6.0kW Generator
1 x 7.5L Fuel Tank
6 x T-Motor motor
6 x T-Motor ESC
3 x T-Motor 29*8.7 inch propeller
1 x CUAV V5+ Flight Controller with NEO V2 GPS module
1 x YANGDA YR16S 16 Channel Radio Controller
2 x 6S 2500mAh lipo batteries
1 x Generator accessory(starter, fuel level indicator, cable/wire etc)
1 x Assemble and test service

Options

Flight controller: DJI A3DJI A3 Pro
Video transmitter & receiver: Herelink(5-10KM range)Videopass-H15(15KM range)Videopass-H30(30KM range)
Delivery box: KUA Drop System

Photos

1600l-hybrid-new-6.jpg

1600l-hybrid-new-4.jpg

1600l-hybrid-new-3.jpg

1600l-hybrid-new-8.jpg

1600l-hybrid-new-5.jpg

1600l-hybrid-new-7.jpg

1600l-hybrid-new-2.jpg

1600l-hybrid-new-1.jpg

2.4kw-engine.jpg

3.6kw-engine.jpg

6.0kw-engine.jpg