The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

YANGDA MapCam-I Full Frame Mapping Camera For VTOL Fixed-wing

YANGDA MapCam-I Full Frame Mapping Camera For VTOL Fixed-wing

$2,469.00
SKU:
MapCam-I
Weight:
5.00 KGS

Introduction

Developed based on Sony A7R camera core, MapCam-I 36.4MP camera is very suitable for high accuracy mapping & survey missions.
Its full-frame sensor guarantees superior image resolution for a drone survey camera; meanwhile, a low distortion lens ensures the best reconstruction results.Together with the integrated PPK module, MapCam-I provides you with data accuracy down to 1cm.

Lightweight and compact
MapCam-I mapping camera weighs as little as 330g to help you meet your payload weight allowance.

Easy to use
The parameter setting of MapCam-I has been configured for your mapping usage.
Then only two more steps are needed to make it work. Step 1: assign one PWM signal from your flight controller for the camera shutter trigger. Step 2: power it on.

RTK/PPK system
For high accuracy mapping tasks, MapCam-I works with Emlid Reach RTK/PPK system to offer you data accuracy down to 1cm.

Compatible VTOL drones
MapCam-I mapping camera is compatible with these VTOL fixed-wing platforms: Mapird, FW-250 and FW-320.

Specification

MapCam-I

Sensor 35mm full-frame Exmor CMOS sensor(35.9x24mm)
Number of Pixels(effective) 36.4MP
Lens compatibility E-mount lenses
Lens option 35mm by default, 25mm/40mm optional.
Hot Shoe signal Supported (already connected with PPK air unit)
Shutter Trigger PWM signal (5-5.8V)
Shutter Speed 30-1/8000sec
Continuous shooting 4FPS
Storage Card Type SD/SDHC/SDXC Card/MS
Storage  SD Card (maximum support 640G)
Parameter Setting Button/USB (already configured)
Data Reading SD card/USB
Size 130 x 100 x 73mm (with damping holder)
Power 7.4-8.4V
Weight 330g (camera & PPK air unit)
370g (camera & PPK air unit & damping holder)

 

RTK/PPK Base Station

Mechanical
Size 145 x 145 x 85 mm
Weight 690 g
Operating temperature -20ºC ~ +65ºC
Ingress protection IP67 (water and dustproof)
Electrical
Battery life 30 hours
Charging port MicroUSB 5V
External power input 6-40V
Certifications FCC, CE
Positioning
Static horizontal 5 mm + 1 ppm
Static vertical 10 mm + 2 ppm
Kinematic horizontal 7 mm + 1 ppm
Kinematic vertical 14 mm + 2 ppm
Connectivity
Radio LoRa 868/915 MHz
Wi-Fi 802.11b/g/n
Bluetooth 4.0/2.1 EDR
Interfaces USB, RS232, PPS, Event
Data
Internal storage 8 GB
Correction input RTCM2, RTCM3
Solution output NMEA, ERB, plain text
Logs RINEX2.X, RINEX3.X
GNSS
Signals GPS/QZSS L1, GLONASS G1, BeiDou B1, Galileo E1, SBAS
Tracking channels 72
IMU 9DOF
Update rate 14 Hz / 5 Hz

 

Your Purchase Includes

Without RTK/PPK System Version
1 x YANGDA MapCam-I mapping camera
1 x Damping holder

With RTK/PPK System Version
1 x YANGDA MapCam-I mapping camera
1 x Damping holder
1 x RTK/PPK air unit
1 x RTK/PPK base station

Product Photos

mapcam-i-01-01.jpgmapcam-i-02.jpgmapcam-i-03.jpgmapcam-i-04-01.jpgmapcam-i-05.jpgmapcam-i-06.jpgmapcam-i-07.jpgmapcam-i-08.jpgmapcam-i-09.jpgmapcam-i-10.jpgmapcam-i-11.jpg